Filters
Question type
Study Flashcards

The data center team requires that they be alerted if any of the servers in a remote site go down. However, they do NOT want to receive alerts when the remote site connection goes down. Which two configuration steps should you take within your network management system (NMS) to meet these requirements? (Choose two.)


A) set up alerts on server status
B) set up alerts on the remote connection status
C) set each of the servers as dependencies for each other
D) set up the remote connection as a dependency for each of the servers
E) set up alerts on the remote router status

F) B) and E)
G) A) and E)

Correct Answer

verifed

verified

You have recently implemented a VoIP infrastructure within the company network. You are receiving trouble tickets indicating calls are dropping between their New York and San Francisco offices. Which two IP service level agreement (SLA) measurements should you use to identify the cause of the issue?


A) latency
B) SIP
C) NetFlow
D) available bandwidth
E) jitter

F) C) and D)
G) B) and E)

Correct Answer

verifed

verified

Companies A and B have merged and are both using the 10.10.x..x /16 networks. Company A uses Orion NPM and would like to monitor two key servers within company B'snetwork. Which solution for this situation involves the fewest configuration steps?


A) use static NAT
B) use dynamic NAT
C) re-address company B's network
D) use DNS for accessing the servers

E) B) and C)
F) A) and D)

Correct Answer

verifed

verified

When planning the deployment of the database server for Orion NPM, what are two primary considerations? (Choose two.)


A) database clustering
B) RAID configurations
C) CPU and memory size
D) type of NIC card used
E) type of RAM

F) B) and C)
G) C) and E)

Correct Answer

verifed

verified

The IP address of a network management system (NMS) is 10.1.5.2, and the IP address of a new server that it is monitoring on the same VLAN is 10.1.5.129. The NMS cannot reach the server with SNMP or ICMP. What is the most likely cause?


A) The firewall is blocking SNMP and ICMP.
B) The subnet mask of the server is misconfigured.
C) The ARP table of the router has not refreshed.
D) The MAC address of the NMS has changed.

E) A) and C)
F) None of the above

Correct Answer

verifed

verified

A network engineer has created a custom report in Orion NPM with the following parameters: 1. Fields are set to "Node ID, Node Name, Average Response Time." 2. Timeframe is set to "Last30 days." 3. Summarization is set to "Month." What is an accurate representation of what this report will display?


A) average response time for the last month on all devices and interfaces
B) average response time for the last month on all devices
C) average response time per day of the last month on all devices and interfaces
D) average response time per day of the last month on all devices

E) B) and C)
F) B) and D)

Correct Answer

verifed

verified

What is the most reliable method of detecting network issues?


A) listening for SNMP traps
B) listening for Syslog messages
C) conducting SNMP polling
D) monitoring traffic with NetFlow

E) B) and D)
F) A) and D)

Correct Answer

verifed

verified

Which two types of data does Orion NetFlow Traffic Analyzer collect from network devices? (Choose two.)


A) NBAR
B) NetFlow
C) IP service level agreement (SLA)
D) SNMP
E) sFlow

F) B) and C)
G) None of the above

Correct Answer

verifed

verified

What should the network engineer do during scheduled down time to prevent Orion NPM from triggering alerts on the affected devices?


A) edit the alerts to exclude the devices
B) unmanage the devices
C) suppress any alerts that might be triggered by the devices
D) suppress the devices

E) A) and B)
F) B) and C)

Correct Answer

verifed

verified

Network engineers want the ability to see a custom property when the cursor hovers over a node on the map. How do you enable this functionality in Orion NPM?


A) add custom property labels to the nodes in the map
B) enable the custom property for map display
C) set up a drill-down text box for nodes in the map
D) configure a custom tool tip for the nodes in the map

E) None of the above
F) A) and B)

Correct Answer

verifed

verified

Which management protocol should you use to analyze network traffic in and out of a router interface?


A) WMI
B) Syslog
C) IP service level agreement (SLA)
D) sFlow

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

What is the most direct way to measure an application's performance?


A) ping the application server
B) collect application data in NetFlow
C) time application transactions
D) collect application server CPU and memory statistics

E) C) and D)
F) None of the above

Correct Answer

verifed

verified

How does the Orion Universal Device Poller (UnDP) monitor a device's statistics that are Not included in the standard Orion NPM MIB database?


A) by manually associating the device'sOID to Orion
B) by keeping a copy of the device's MIB on the Orion NPM Server
C) by automatically searching the common MIB repositories and updating Orion
D) by manually compiling the MIB into the Orion MIB database
E) by manually compiling the OID into the Orion MIB database

F) B) and D)
G) B) and C)

Correct Answer

verifed

verified

An Orion NPM administrator enables audible alerts through the Orion Web Console. Assuming you are on a view that shows alerts, when will the audible alert be triggered?


A) every 10 minutes if there is an active alert
B) whenever your view includes Nodes With Problems
C) whenever a new alert has appeared since the last refresh
D) when you first log in to the Web Console

E) A) and B)
F) None of the above

Correct Answer

verifed

verified

When adding a node to Orion NPM, which user interface allows you to assign a Universal Device Poller (UnDP) as part of the same workflow?


A) System Manager
B) Web Node Management
C) Network Discovery Wizard
D) Seed File

E) A) and C)
F) A) and D)

Correct Answer

verifed

verified

You are monitoring your Internet connection, and your ISP has guaranteed512 Kbps. Historical data shows that your connection speed holds at 256 Kbps for long periods of time, but never exceeds this speed. What does this indicate?


A) the ISP has misconfigured the link.
B) the WAN router is misconfigured.
C) the NAT table is overloaded.
D) QoS is dropping low priority traffic.

E) A) and B)
F) B) and C)

Correct Answer

verifed

verified

Which Universal Device Poller (UnDP) transform should you use to reduce the number of decimal places shown in graphs and tables?


A) Truncate
B) ColumnMaximim
C) Maximum
D) Minimum

E) B) and C)
F) A) and D)

Correct Answer

verifed

verified

Which two performance metrics can be affected by proper QoS implementation? (Choose two.)


A) jitter
B) shaping
C) marking
D) queuing
E) latency

F) A) and D)
G) C) and D)

Correct Answer

verifed

verified

A network engineer would recommend decreasing polling frequency in order to address which topology-based issue?


A) high CPU values on WAN routers
B) WAN bandwidth availability
C) SQL database scalability issues
D) redundancy for single-homed sites

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

Which traffic type should be allowed through the network in order to leverage HTTPS for network monitoring?


A) TCP traffic on port 443
B) UDP traffic on port 443
C) TCP traffic on port 1433
D) UDP traffic on port 1433

E) B) and D)
F) A) and C)

Correct Answer

verifed

verified

Showing 81 - 100 of 128

Related Exams

Show Answer